| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Mi Feb 11, 2009 10:55 pm Titel: Trying the rubber cups for lens disassembly |
|
 Verfasst am: Mi Feb 11, 2009 10:55 pm Titel: Trying the rubber cups for lens disassembly |
|
|
Jesito wrote:
In yesteday parcel's there were also some rubber cups to disassemble lenses. This one is the "small lenses" kit, useful for my rangefinders and the narrower lenses.
The kit contains four dual cups, each one can manage two lens widths. In my set they were 48/46, 44/42, 40/38 and 38/36.
There were also two suction pads that have shown unvaluable to manage the individual lenses.
This is the kit box:
So let's try to open the top of my Weltblick 135mm lens (really an OEM Tamron in disguise), to blow some dust particles that are inside. I didn't try it before, because I was afraid to scratch the topside with the wrench.
First step, select the proper cup and size, this time was 44mm. It fits inside the lens cylinder but doesn't touch the glass!.
Firmly pressing on top with the hand and turning left, loosened the retaining ring for this lens:
Once the ring out, the suction pad enters into action:
Now I can access to the fist space inside the lens to clean it up.
Finally, the way back:
As a summary: Very interesting and useful tool, no risk of scratching the lenses. I'm going to order the kit for bigger lenses...
Kind regards.
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Mi Feb 11, 2009 11:01 pm Titel: |
|
 Verfasst am: Mi Feb 11, 2009 11:01 pm Titel: |
|
|
Attila wrote:
Thank you for both of you to provide this great information and tool set for community! |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Mi Feb 11, 2009 11:03 pm Titel: |
|
 Verfasst am: Mi Feb 11, 2009 11:03 pm Titel: |
|
|
Jesito wrote:
Thanks Attila, these cups are really easy and safe to use!
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
hk300
 Anmeldungsdatum: 30.10.2008 Beiträge: 1041 Wohnort: Hong Kong
|
 Verfasst am: Mi Feb 11, 2009 11:52 pm Titel: |
|
 Verfasst am: Mi Feb 11, 2009 11:52 pm Titel: |
|
|
hk300 wrote:
Jes ... the following diameters (in mm) are available:
2 rubbers set:
65/75, 80/84
3 rubbers set:
Sizes: 47/50, 52.5/56, 60/70
4 rubbers set:
Sizes: 34/36, 38/40, 42/44, 46/48
9 rubbers set:
(32)30.2/31.5, (30)28.2/29.8, (28)26.4/27.8, (26)24.5/25.7, (24)22.3/23.8, (22)20.5/21.5, (20)18.3/19.7, (18)16.5/17.5, (16)14.4/15.5 _________________ No longer member , please don't try to contact to him |
|
| Nach oben |
|
 |
luisalegria
 Anmeldungsdatum: 07.03.2008 Beiträge: 6602 Wohnort: San Francisco, USA
Expire: 2018-01-18
|
 Verfasst am: Do Feb 12, 2009 12:48 am Titel: |
|
 Verfasst am: Do Feb 12, 2009 12:48 am Titel: |
|
|
luisalegria wrote:
I need to try the suction cup. I have a couple of lenses that are stuck, ring removed but I can't take them out. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Do Feb 12, 2009 5:22 am Titel: |
|
 Verfasst am: Do Feb 12, 2009 5:22 am Titel: |
|
|
Jesito wrote:
| luisalegria hat folgendes geschrieben:: |
| I need to try the suction cup. I have a couple of lenses that are stuck, ring removed but I can't take them out. |
Luis,
Not sure you can do a strong traction with the suction pads. To me are very useful to avoid turning down the lens. Sometimes there are shims or other elements that can fall down and you can lose perspective of where they were placed. In this way you extract the glass only and you can see what's inside without disturbing the setup.
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
hk300
 Anmeldungsdatum: 30.10.2008 Beiträge: 1041 Wohnort: Hong Kong
|
 Verfasst am: Do Feb 12, 2009 5:29 am Titel: |
|
 Verfasst am: Do Feb 12, 2009 5:29 am Titel: |
|
|
hk300 wrote:
perhaps you can use something like this ...
sorry for the crappy sharpness _________________ No longer member , please don't try to contact to him |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Do Feb 12, 2009 5:41 am Titel: |
|
 Verfasst am: Do Feb 12, 2009 5:41 am Titel: |
|
|
Jesito wrote:
| hk300 hat folgendes geschrieben:: |
Jes ... the following diameters (in mm) are available:
2 rubbers set:
65/75, 80/84
3 rubbers set:
Sizes: 47/50, 52.5/56, 60/70
4 rubbers set:
Sizes: 34/36, 38/40, 42/44, 46/48
9 rubbers set:
(32)30.2/31.5, (30)28.2/29.8, (28)26.4/27.8, (26)24.5/25.7, (24)22.3/23.8, (22)20.5/21.5, (20)18.3/19.7, (18)16.5/17.5, (16)14.4/15.5 |
Thanks, Alex.
I think I would need the 3 set and the 9 set... ¿What about pricing and shipping costs?.
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
edumad
 Anmeldungsdatum: 11.02.2009 Beiträge: 348 Wohnort: Esposende, Portugal
|
 Verfasst am: Mo Feb 16, 2009 5:09 pm Titel: |
|
 Verfasst am: Mo Feb 16, 2009 5:09 pm Titel: |
|
|
edumad wrote:
| hk300 hat folgendes geschrieben:: |
perhaps you can use something like this ...
sorry for the crappy sharpness |
that sure would come in handy, especially for the inner elements...
What I've done is just turning it around, almost lost sight of which element was which... Good thing I had a schematic.
Where can we get these suction thingies? |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Mo Feb 16, 2009 5:10 pm Titel: |
|
 Verfasst am: Mo Feb 16, 2009 5:10 pm Titel: |
|
|
Attila wrote:
You can order here in pm from Alex (hk300) or me, it will be available soon on Ebay too in my web shop. |
|
| Nach oben |
|
 |
Pancolart
 Anmeldungsdatum: 04.02.2008 Beiträge: 3710 Wohnort: Slovenia, EU
Expire: 2013-11-18
|
 Verfasst am: Fr Okt 23, 2009 12:53 pm Titel: Weltblick |
|
 Verfasst am: Fr Okt 23, 2009 12:53 pm Titel: Weltblick |
|
|
Pancolart wrote:
How do you like that 135mm Weltblick (Tamron?) lens? It seems very similar to Vivitar 1.8/85mm classic. It might be that Weltblick (Tamron?) did both of them. I haven't seen such strange aparture blades positioning anywhere else. |
|
| Nach oben |
|
 |
Marcel Tichit
Anmeldungsdatum: 24.10.2009 Beiträge: 1
|
 Verfasst am: Sa Okt 24, 2009 12:22 pm Titel: Mugs disassembly. |
|
 Verfasst am: Sa Okt 24, 2009 12:22 pm Titel: Mugs disassembly. |
|
|
Marcel Tichit wrote:
: wink: Bonjour, nouveau venu sur la M42, je suis équipé d'un système optique à plusieurs. (Helios, Tessar, Jupiter)
Certains sont anciens et ont besoin de nettoyer et de lubrifier.
Je cherche des "coupes" vu dans cette catégorie.
Je ne peux pas les trouver dans des dimensions qui me faut:
32mm à 72mm
Si vous savez où, je vous remercie de me donner les coordonnées.
Je vous remercie ............ Marcel _________________ Amateur de photo. Nikoniste et adepte du nouveau M42.
Retraité |
|
| Nach oben |
|
 |
|
|