MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Tiffen filter 812,still looks smudged ??
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Just received the above filter 58mm lens,I have cleaned it with lens cloth but when you look at it in the light it still looks dirty,hazy...not surface dirt but in/on the glass.
How do you clean it or have I got a dud,or just a lens protector??
Thanks


Reply

Is this a polarizing filter?
If yes then you should remove one retaining ring and glass from that same side. Now you can clean the two surfaces inside.
If it is not a polarizer. Sorry, I have no clue.


Reply

Try optic cleaning fluid. Put few drops on one side and gently wipe in circular motion, do then the other side. Use a clean lens cloth or optic cleaning paper.
F16SUNSHINE hat folgendes geschrieben::
Is this a polarizing filter?
It's a warming filter, amber in color.


Reply

@marty do you mean the stuff to clean contact lens?

@F16SUNSHINE no it is as marty says,It was cheap on ebay mainly bought to protect my lens.

I will try the cleaning tomorrow,thanks for the advice.


Reply

Mo-Fo hat folgendes geschrieben::
do you mean the stuff to clean contact lens?

I don't know if it's the same formulation. Mine it's Hama branded, you should find it at a photo store or an optic store. It might be the same formulation used for cleaning spectacles.
Mo-Fo hat folgendes geschrieben::
mainly bought to protect my lens.
Beware: this is a colored filter, it's not suitable for the use you intend. If used in a non appropriated situation it will give an unwanted color cast. If you need just to protect the front element you should look for a clear one, usually these are labeled UV or 0.
Marty.


Reply

Thanks for the tip,I realized this as I bought it...thought it may come in handy as I get more experienced.Just have to remember this if it's on to take it off. Laughing


Reply

Be careful with fluids: Tiffen sold some solid glass and even more acrylic filters for amateurs. But the real high-end professional filters they are famous for consist of dyed gelatin mounted between polished glass plates. They are lacquer sealed, but repeated creep of liquids between rim and glass will damage the seal. Indeed it may already have done so, going by your problem description.

Sevo


Reply

marty hat folgendes geschrieben::
Beware: this is a colored filter, it's not suitable for the use you intend. If used in a non appropriated situation it will give an unwanted color cast. If you need just to protect the front element you should look for a clear one, usually these are labeled UV or 0.


YMMV. If I put a filter on at all, it may as well improve the colour balance - and almost every slide film (maybe except for Astia Rolling Eyes ) can be improved on. There are more films that need a 81B or C, but 812 is a perfect counter for the cold to green cast Velvia 50 will take on in outdoor settings.


Reply

It sounds like glass.it has two notches on the outward facing side across from each other?