| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: So Jul 05, 2009 10:50 pm Titel: How do you cut film? |
|
 Verfasst am: So Jul 05, 2009 10:50 pm Titel: How do you cut film? |
|
|
Orio wrote:
I'd like to ask you, how to you cut film into smaller stripes?
So far I have used scissors, but it's very difficult to make a precision cut, especially with small format film.
Is there a more effective way? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
berraneck
 Anmeldungsdatum: 24.05.2009 Beiträge: 972 Wohnort: prague, czech republic
|
 Verfasst am: So Jul 05, 2009 11:17 pm Titel: |
|
 Verfasst am: So Jul 05, 2009 11:17 pm Titel: |
|
|
berraneck wrote:
I cut film with scissors and never had problem.. it isn´t as difficult as it seems, just few practice and you won´t cut a shot. It isn´t neccesary to be precise in microns:) _________________ equipment doesn´t count, good photographs do |
|
| Nach oben |
|
 |
themoleman342
 Anmeldungsdatum: 21.10.2007 Beiträge: 2190 Wohnort: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Verfasst am: So Jul 05, 2009 11:56 pm Titel: |
|
 Verfasst am: So Jul 05, 2009 11:56 pm Titel: |
|
|
themoleman342 wrote:
I've tried a couple different methods but have always come back to scissors. I found that a pair of very sharp fabric scissors works best as opposed to a simple pair of household ones. I bought a pair specifically to cut my strips.
~Marc |
|
| Nach oben |
|
 |
visualopsins
 Anmeldungsdatum: 05.03.2009 Beiträge: 11698 Wohnort: California
Expire: 2027-07-11
|
 Verfasst am: Mo Jul 06, 2009 12:05 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 12:05 am Titel: |
|
|
visualopsins wrote:
search ebaY Photo section for "film cutter" _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Nach oben |
|
 |
patrickh
 Anmeldungsdatum: 23.08.2007 Beiträge: 8551 Wohnort: Oregon
Expire: 2011-11-18
|
 Verfasst am: Mo Jul 06, 2009 2:00 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 2:00 am Titel: |
|
|
patrickh wrote:
The old exakta had a film cutter built in
patrickh _________________ DSLR: Nikon D300 Nikon D200 Nex 5N
MF Zooms: Kiron 28-85/3.5, 28-105/3.2, 75-150/3.5, Nikkor 50-135/3.5 AIS // MF Primes: Nikkor 20/4 AI, 24/2 AI, 28/2 AI, 28/2.8 AIS, 28/3.5 AI, 35/1.4 AIS, 35/2 AIS, 35/2.8 PC, 45/2.8 P, 50/1.4 AIS, 50/1.8 AIS, 50/2 AI, 55/2.8 AIS micro, 55/3.5 AI micro, 85/2 AI, 100/2,8 E, 105/1,8 AIS, 105/2,5 AIS, 135/2 AIS, 135/2.8 AIS, 200/4 AI, 200/4 AIS micro, 300/4.5 AI, 300/4.5 AI ED, Arsat 50/1.4, Kiron 28/2, Vivitar 28/2.5, Panagor 135/2.8, Tamron 28/2.5, Tamron 90/2.5 macro, Vivitar 90/2.5 macro (Tokina) Voigtlander 90/3.5 Vivitar 105/2.5 macro (Kiron) Kaleinar 100/2.8 AI Tamron 135/2.5, Vivitar 135/2.8CF, 200/3.5, Tokina 400/5,6
M42: Vivitar 28/2.5, Tamron 28/2.5, Formula5 28/2.8, Mamiya 28/2.8, Pentacon 29/2.8, Flektogon 35/2.4, Flektogon 35/2.8, Takumar 35/3.5, Curtagon 35/4, Takumar 50/1.4, Volna-6 50/2.8 macro, Mamiya 50/1.4, CZJ Pancolar 50/1,8, Oreston 50/1.8, Takumar 50/2, Industar 50/3.5, Sears 55/1.4, Helios 58/2, Jupiter 85/2, Helios 85/1.5, Takumar 105/2.8, Steinheil macro 105/4.5, Tamron 135/2.5, Jupiter 135/4, CZ 135/4, Steinheil Culminar 135/4,5, Jupiter 135/3.5, Takumar 135/3.5, Tair 135/2.8, Pentacon 135/2.8, CZ 135/2.8, Taika 135/3.5, Takumar 150/4, Jupiter 200/4, Takumar 200/4
Exakta: Topcon 100/2.8(M42), 35/2.8, 58/1.8, 135/2.8, 135/2.8 (M42), Kyoei Acall 135/3.5
C/Y: Yashica 28/2.8, 50/1.7, 135/2.8, Zeiss Planar 50/1.4, Distagon 25/2.8
Hexanon: 28/3.5, 35/2.8, 40/1.8, 50/1.7, 52/1.8, 135/3.2, 135/3.5, 35-70/3.5, 200/3.5
P6 : Mir 38 65/3.5, Biometar 80/2.8, Kaleinar 150/2.8, Sonnar 180/2.8
Minolta SR: 28/2.8, 28/3.5, 35/2.8, 45/2, 50/2, 58/1.4, 50/1.7, 135/2.8, 200/3.5
RF: Industar 53/2.8, Jupiter 8 50/2
Enlarg: Rodagon 50/5,6, 80/5,6, 105/5.6, Vario 44-52/4, 150/5.6 180/5.6 El Nikkor 50/2,8,63/2.8,75/4, 80/5,6, 105/5.6, 135/5.6 Schneider 60/5.6, 80/5.6, 80/4S,100/5.6S,105/5.6,135/5.6, 135/5.6S, 150/5.6S, Leica 95/4 |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Mo Jul 06, 2009 2:48 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 2:48 am Titel: |
|
|
Jesito wrote:
I use a small piece of glass as a base (A4 size) and cut on top of it with a sharp cutter and a metal rule. It works very well for me.
This was the way I learned to cut leather past year but it does apply successfully to other materials, as the film.
Regards.
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Mo Jul 06, 2009 4:22 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 4:22 am Titel: |
|
|
Orio wrote:
| Jesito hat folgendes geschrieben:: |
I use a small piece of glass as a base (A4 size) and cut on top of it with a sharp cutter and a metal rule. It works very well for me.
This was the way I learned to cut leather past year but it does apply successfully to other materials, as the film.
Regards.
Jes. |
Thanks Jes. So you are able to hold the film steady while using the cutter. I am afraid it would slip under the cutter pressure. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
patrickh
 Anmeldungsdatum: 23.08.2007 Beiträge: 8551 Wohnort: Oregon
Expire: 2011-11-18
|
 Verfasst am: Mo Jul 06, 2009 5:19 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 5:19 am Titel: |
|
|
patrickh wrote:
How about a rotary guillotine?
patrickh _________________ DSLR: Nikon D300 Nikon D200 Nex 5N
MF Zooms: Kiron 28-85/3.5, 28-105/3.2, 75-150/3.5, Nikkor 50-135/3.5 AIS // MF Primes: Nikkor 20/4 AI, 24/2 AI, 28/2 AI, 28/2.8 AIS, 28/3.5 AI, 35/1.4 AIS, 35/2 AIS, 35/2.8 PC, 45/2.8 P, 50/1.4 AIS, 50/1.8 AIS, 50/2 AI, 55/2.8 AIS micro, 55/3.5 AI micro, 85/2 AI, 100/2,8 E, 105/1,8 AIS, 105/2,5 AIS, 135/2 AIS, 135/2.8 AIS, 200/4 AI, 200/4 AIS micro, 300/4.5 AI, 300/4.5 AI ED, Arsat 50/1.4, Kiron 28/2, Vivitar 28/2.5, Panagor 135/2.8, Tamron 28/2.5, Tamron 90/2.5 macro, Vivitar 90/2.5 macro (Tokina) Voigtlander 90/3.5 Vivitar 105/2.5 macro (Kiron) Kaleinar 100/2.8 AI Tamron 135/2.5, Vivitar 135/2.8CF, 200/3.5, Tokina 400/5,6
M42: Vivitar 28/2.5, Tamron 28/2.5, Formula5 28/2.8, Mamiya 28/2.8, Pentacon 29/2.8, Flektogon 35/2.4, Flektogon 35/2.8, Takumar 35/3.5, Curtagon 35/4, Takumar 50/1.4, Volna-6 50/2.8 macro, Mamiya 50/1.4, CZJ Pancolar 50/1,8, Oreston 50/1.8, Takumar 50/2, Industar 50/3.5, Sears 55/1.4, Helios 58/2, Jupiter 85/2, Helios 85/1.5, Takumar 105/2.8, Steinheil macro 105/4.5, Tamron 135/2.5, Jupiter 135/4, CZ 135/4, Steinheil Culminar 135/4,5, Jupiter 135/3.5, Takumar 135/3.5, Tair 135/2.8, Pentacon 135/2.8, CZ 135/2.8, Taika 135/3.5, Takumar 150/4, Jupiter 200/4, Takumar 200/4
Exakta: Topcon 100/2.8(M42), 35/2.8, 58/1.8, 135/2.8, 135/2.8 (M42), Kyoei Acall 135/3.5
C/Y: Yashica 28/2.8, 50/1.7, 135/2.8, Zeiss Planar 50/1.4, Distagon 25/2.8
Hexanon: 28/3.5, 35/2.8, 40/1.8, 50/1.7, 52/1.8, 135/3.2, 135/3.5, 35-70/3.5, 200/3.5
P6 : Mir 38 65/3.5, Biometar 80/2.8, Kaleinar 150/2.8, Sonnar 180/2.8
Minolta SR: 28/2.8, 28/3.5, 35/2.8, 45/2, 50/2, 58/1.4, 50/1.7, 135/2.8, 200/3.5
RF: Industar 53/2.8, Jupiter 8 50/2
Enlarg: Rodagon 50/5,6, 80/5,6, 105/5.6, Vario 44-52/4, 150/5.6 180/5.6 El Nikkor 50/2,8,63/2.8,75/4, 80/5,6, 105/5.6, 135/5.6 Schneider 60/5.6, 80/5.6, 80/4S,100/5.6S,105/5.6,135/5.6, 135/5.6S, 150/5.6S, Leica 95/4 |
|
| Nach oben |
|
 |
Orio
Anmeldungsdatum: 24.02.2007 Beiträge: 29545 Wohnort: West Emilia
Expire: 2012-12-04
|
 Verfasst am: Mo Jul 06, 2009 5:22 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 5:22 am Titel: |
|
|
Orio wrote:
| patrickh hat folgendes geschrieben:: |
How about a rotary guillotine?
patrickh |
I would not like to spend that much, Patrick.
I'm preferably for some clever homemade solution, like that of Jes. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Nach oben |
|
 |
Sevo
 Anmeldungsdatum: 22.08.2008 Beiträge: 1189 Wohnort: Frankfurt, Germany
Expire: 2012-12-03
|
 Verfasst am: Mo Jul 06, 2009 9:18 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 9:18 am Titel: |
|
|
Sevo wrote:
What film do you want to cut to which dimensions? For cutting developed film to enlarger, scanner and archive friendly strip length, any quality scissors will do, and will indeed do better than cutters and cutting mats or even the slide cutters of old, as scissors don't need any contact with the image area, while the mentioned methods press the picture onto some cutting mat or rail or even drag it across the same.
You'll need dedicated machinery if you want to cut unexposed film to some other format, as you'll have to cut in complete darkness and achieve tolerances in the order of 0.1mm over the full length of the film (while cutting to strips is done in broad daylight with a tolerance of 3mm over 35mm length).
For cutting sheet film down to another size (e.g. 4x5" to 9x12cm), I've had good results with a professional grade guillotine cutter where I screwed alignment rails for either dimension onto the base plate (i.e. you'll need one cutter per target size). For cutting 135mm down to 110 or Minox there are special cutters - some companies still make them (often distributed though Japanese Minox and Pocket fan sites), and there are recipes for DIY ones (usually involving parts from daylight loaders) on the net. _________________ Sevo |
|
| Nach oben |
|
 |
Xpres
 Anmeldungsdatum: 11.12.2007 Beiträge: 964 Wohnort: UK
Expire: 2014-10-28
|
 Verfasst am: Mo Jul 06, 2009 10:42 am Titel: |
|
 Verfasst am: Mo Jul 06, 2009 10:42 am Titel: |
|
|
Xpres wrote:
I've always used scissors, I keep a small sharp pair for cutting negs. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| Nach oben |
|
 |
marty
 Anmeldungsdatum: 09.04.2009 Beiträge: 767 Wohnort: Italy
|
 Verfasst am: Di Jul 07, 2009 10:38 pm Titel: |
|
 Verfasst am: Di Jul 07, 2009 10:38 pm Titel: |
|
|
marty wrote:
I cut my 135 or 120 rolls with a Dahle branded guillotine paper cutter. I align the film border with the guide positioned on the side of the cutter plane and carefully aim at the middle of the space between two frames. The result are perfectly clean 90 degrees cuts.
Marty. |
|
| Nach oben |
|
 |
alex
 Anmeldungsdatum: 18.04.2009 Beiträge: 561 Wohnort: UK
|
 Verfasst am: Di Jul 07, 2009 11:41 pm Titel: |
|
 Verfasst am: Di Jul 07, 2009 11:41 pm Titel: |
|
|
alex wrote:
I use small sharp straight fabric scissors. For 35mm I look at how the frame edges line up with the nearest sprocket holes, make the line-up as close as I can to the centre, and snip cleanly. As I've been doing it for a very long time now, I've finally got the hang of it. Rollfilm is much easier. I don't like pressing a film against any surface such as a cutting mat, so I rely on a steady hand, fingers perpendicular on the edges, and cut in mid-air. I've never yet had a mis-cut. I usually scan rollfilm (on an Epson 4990) before cutting it, as I find it easier. I line up one edge of the frame with a little datum mark on the film holder so that I know the first frame 'marquee' will always be in the right place for all subsequent frames. _________________ Alex |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Mi Jul 08, 2009 7:29 am Titel: |
|
 Verfasst am: Mi Jul 08, 2009 7:29 am Titel: |
|
|
Jesito wrote:
| marty hat folgendes geschrieben:: |
I cut my 135 or 120 rolls with a Dahle branded guillotine paper cutter. I align the film border with the guide positioned on the side of the cutter plane and carefully aim at the middle of the space between two frames. The result are perfectly clean 90 degrees cuts.
Marty. |
That's a sound idea!. I got one of those small guillotines to cut paper, it should be somewhere in the garage...
Since it has an alingment edge it will be very fine to cut the film at 90º...
Thanks for sharing!!
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
Jesito
 Anmeldungsdatum: 24.08.2007 Beiträge: 5745 Wohnort: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Verfasst am: Mi Jul 08, 2009 7:35 am Titel: |
|
 Verfasst am: Mi Jul 08, 2009 7:35 am Titel: |
|
|
Jesito wrote:
| Orio hat folgendes geschrieben:: |
| Jesito hat folgendes geschrieben:: |
I use a small piece of glass as a base (A4 size) and cut on top of it with a sharp cutter and a metal rule. It works very well for me.
This was the way I learned to cut leather past year but it does apply successfully to other materials, as the film.
Regards.
Jes. |
Thanks Jes. So you are able to hold the film steady while using the cutter. I am afraid it would slip under the cutter pressure. |
It won't. I glued a leather strip on the back of the metal rule to avoid damaging the film, and it keeps steady enough. I always use a sharp cutter, I haven't had any troubles so far. But the option of the Dahle guillotine seems to be much better...
Regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Nach oben |
|
 |
hexi
 Anmeldungsdatum: 01.07.2009 Beiträge: 1631 Wohnort: France
Expire: 2011-11-18
|
 Verfasst am: Mi Jul 08, 2009 5:38 pm Titel: |
|
 Verfasst am: Mi Jul 08, 2009 5:38 pm Titel: |
|
|
hexi wrote:
Small russian made scisors. i mean they could have been from any country on the world but hey i never cut a frame, there is a 2mm space between each which is enough for me. |
|
| Nach oben |
|
 |
GrahamNR17
 Anmeldungsdatum: 17.01.2009 Beiträge: 1855 Wohnort: Norfolk, UK
Expire: 2012-09-06
|
 Verfasst am: Mi Jul 08, 2009 6:02 pm Titel: |
|
 Verfasst am: Mi Jul 08, 2009 6:02 pm Titel: |
|
|
GrahamNR17 wrote:
Tiny very sharp scissors for me. |
|
| Nach oben |
|
 |
marty
 Anmeldungsdatum: 09.04.2009 Beiträge: 767 Wohnort: Italy
|
 Verfasst am: Mi Jul 08, 2009 6:08 pm Titel: |
|
 Verfasst am: Mi Jul 08, 2009 6:08 pm Titel: |
|
|
marty wrote:
| Jesito hat folgendes geschrieben:: |
| Thanks for sharing!! |
You're welcome |
|
| Nach oben |
|
 |
|
|