| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Fr Jul 03, 2009 8:20 pm Titel: Olympus OM confirm adapter to EOS |
|
 Verfasst am: Fr Jul 03, 2009 8:20 pm Titel: Olympus OM confirm adapter to EOS |
|
|
Rolf wrote:
Hi,
I have a lot of problems with my present confirm adapter. It is not possible to find the exact focus point. The focus lights within the cam flickers all the time.
The following picture shows my actual adapter
The confirm chip looks different to my other confirm adapters to EOS, for example Leica, M42 etc. The chip on these adapters looks like this one
Could it be that this is the reason for my problems? My adapter and the picture of the different adapter are from the same dealer. He is not in a position to look into his warehouse and to deliver one with the chip on his picture. Poor customer service.
Are there any suggestions regarding another and fully functional confirm adapter from your side? I asked also few days ago in a German forum, but with only one answer. This colleague wrote that the problems from OM to EOS are fundamentally.
Many thanks in advance.
Rolf _________________ Rolf |
|
| Nach oben |
|
 |
hk300
 Anmeldungsdatum: 30.10.2008 Beiträge: 1041 Wohnort: Hong Kong
|
 Verfasst am: Sa Jul 04, 2009 1:00 am Titel: |
|
 Verfasst am: Sa Jul 04, 2009 1:00 am Titel: |
|
|
hk300 wrote:
what lens are you using? _________________ No longer member , please don't try to contact to him |
|
| Nach oben |
|
 |
shadows
 Anmeldungsdatum: 17.02.2009 Beiträge: 122 Wohnort: Canada
|
 Verfasst am: Sa Jul 04, 2009 1:06 am Titel: |
|
 Verfasst am: Sa Jul 04, 2009 1:06 am Titel: |
|
|
shadows wrote:
Wild shot, but maybe the chip isn't making proper contact with the electronic pins on the camera, could be offset. |
|
| Nach oben |
|
 |
hk300
 Anmeldungsdatum: 30.10.2008 Beiträge: 1041 Wohnort: Hong Kong
|
 Verfasst am: Sa Jul 04, 2009 1:36 am Titel: |
|
 Verfasst am: Sa Jul 04, 2009 1:36 am Titel: |
|
|
hk300 wrote:
| shadows hat folgendes geschrieben:: |
| Wild shot, but maybe the chip isn't making proper contact with the electronic pins on the camera, could be offset. |
If you put this adapter on your camera, what aperture does it give you? F2 ?
i guess it has something to do with the lens / AF chip combination. Are you trying to use e.g. 50 1.2 or so? _________________ No longer member , please don't try to contact to him |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: Sa Jul 04, 2009 8:00 am Titel: |
|
 Verfasst am: Sa Jul 04, 2009 8:00 am Titel: |
|
|
Rolf wrote:
Hi, thanks for your reply.
I have the following OM lenses
1.4 - 50
1.8 - 50
3,5 - 28 and
8 - 500
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf _________________ Rolf |
|
| Nach oben |
|
 |
eeyore_nl
 Anmeldungsdatum: 09.11.2008 Beiträge: 837 Wohnort: Netherlands
|
 Verfasst am: Sa Jul 04, 2009 5:29 pm Titel: |
|
 Verfasst am: Sa Jul 04, 2009 5:29 pm Titel: |
|
|
eeyore_nl wrote:
| Rolf hat folgendes geschrieben:: |
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf |
I am using the same adapter on an OM - EOS adapter. My experience is also that the focus confirmation is less reliable than on the M42-EOS adapters that I bought before. Which is surprising, because the chip only fools the camera in thinking that an EF lens is attached. The AF circuit is in the camera, not in the chip. |
|
| Nach oben |
|
 |
shadows
 Anmeldungsdatum: 17.02.2009 Beiträge: 122 Wohnort: Canada
|
 Verfasst am: Sa Jul 04, 2009 6:20 pm Titel: |
|
 Verfasst am: Sa Jul 04, 2009 6:20 pm Titel: |
|
|
shadows wrote:
| Rolf hat folgendes geschrieben:: |
The aperture shown in the cam (1DsMkIII and all other Canons) is always f 1.4 at Av-Mode. May be the chip is damaged ? Many thanks for your assistance.
Rolf |
Well the aperture is programmed into the chip, the only way to change that is to change the settings on the chip itself. |
|
| Nach oben |
|
 |
hk300
 Anmeldungsdatum: 30.10.2008 Beiträge: 1041 Wohnort: Hong Kong
|
 Verfasst am: So Jul 05, 2009 12:36 pm Titel: |
|
 Verfasst am: So Jul 05, 2009 12:36 pm Titel: |
|
|
hk300 wrote:
it is strange that the chip is programmed to show up as F1.4... most chips i know are programmed as F2.
My experience with these chips is that they work nicely with some lenses, whereas other lenses will be off.
I would expect that your AF chip is off, especially if this error occurs with more than 1 lens.
The chip itself is the same for all the xx to EOS body adapters. _________________ No longer member , please don't try to contact to him |
|
| Nach oben |
|
 |
Rolf
 Anmeldungsdatum: 02.05.2009 Beiträge: 4170 Wohnort: NRW/Germany
Expire: 2015-12-26
|
 Verfasst am: So Jul 05, 2009 4:49 pm Titel: |
|
 Verfasst am: So Jul 05, 2009 4:49 pm Titel: |
|
|
Rolf wrote:
| hk300 hat folgendes geschrieben:: |
it is strange that the chip is programmed to show up as F1.4... most chips i know are programmed as F2.
My experience with these chips is that they work nicely with some lenses, whereas other lenses will be off.
I would expect that your AF chip is off, especially if this error occurs with more than 1 lens.
The chip itself is the same for all the xx to EOS body adapters. |
Hi Alex,
thanks for your comments. I have send a PM to you.
Rolf _________________ Rolf |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|