| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
sendhil76
Anmeldungsdatum: 01.03.2009 Beiträge: 8 Wohnort: India
|
 Verfasst am: Di Jun 30, 2009 2:14 pm Titel: Carl Zeiss Pancolar 50mm F1.8 and Sigma SD14 problem |
|
 Verfasst am: Di Jun 30, 2009 2:14 pm Titel: Carl Zeiss Pancolar 50mm F1.8 and Sigma SD14 problem |
|
|
sendhil76 wrote:
Hello,
I recently got myself a CZJ Pancolar 50mm F1.8. Tried it today on my SD14 for the first time and was surprised to see a blurry image in the viewfinder??? Tried everything from playing with the focus ring to aperture changes...still a blurry view in the viewfinder???
Cross checked by fixing the CZJ 35mm F2.4 and the Asahi Pentax SMC Takumar 135mm F3.5 lenses...both of them working spot on...no problems.
What could be wrong with this lens? And how can i go about fixing it?
Thanks very much in advance!
Stay well.
Sendhil. |
|
| Nach oben |
|
 |
no-X
 Anmeldungsdatum: 19.07.2008 Beiträge: 2495 Wohnort: Budejky, Czech Republic
|
 Verfasst am: Di Jun 30, 2009 2:34 pm Titel: |
|
 Verfasst am: Di Jun 30, 2009 2:34 pm Titel: |
|
|
no-X wrote:
Twisted lens element, loosy optical block, lens assembled in a wrong way... Do you have black version, or zebra? _________________ (almost) complete list of Helios lenses |
|
| Nach oben |
|
 |
sendhil76
Anmeldungsdatum: 01.03.2009 Beiträge: 8 Wohnort: India
|
 Verfasst am: Di Jun 30, 2009 2:44 pm Titel: |
|
 Verfasst am: Di Jun 30, 2009 2:44 pm Titel: |
|
|
sendhil76 wrote:
| no-X hat folgendes geschrieben:: |
| Do you have black version, or zebra? |
I have the black version.
How do i go about finding whats wrong from some of the causes that you have mentioned?
Thanks for your reply! |
|
| Nach oben |
|
 |
no-X
 Anmeldungsdatum: 19.07.2008 Beiträge: 2495 Wohnort: Budejky, Czech Republic
|
 Verfasst am: Di Jun 30, 2009 3:20 pm Titel: |
|
 Verfasst am: Di Jun 30, 2009 3:20 pm Titel: |
|
|
no-X wrote:
Firstly try to focus on something very close and than to infinity. If you are unable to get sharp image in viewfinder for any distance, then try to unscrew the lens partially and try the same again. If you are unable to get sharp image even in this way, it will be some problem with optical part (not inaccuaratly assembled mechanical part).
If you have auto MC version, it's quite easy to check, if the optical blocks are tightened properly. The easiest way is to set the lens at "M" mode, switch it to f/1.8 (not necessary, but it's easy to remember), screw out the 3 rear screws and remove the rear part.
Than to screw out the 3 screws holding the optical block (they are smaller). Than you can take out the optical block - it can hold tack even if the screws are out.
The optical part consists of front optical block, aperture block and rear optical block. The two optical blocks should be screwed in the aperture block tightly. Also the optical elements should be screwed in the optical block tightly (they should not tinkle if you shake with it).
Anyway, the procedure is the same as for black flektogon, check it here:
http://www.kolumbus.fi/uusilehto/img/lenses/zeiss/disass/
You shouldn't forgot to hood the inner lever before reassembling the rear part (not difficult).
Anyway, if all optical elements are screwed in tightly and the problem persists, it's possible, that some of them is twisted. _________________ (almost) complete list of Helios lenses |
|
| Nach oben |
|
 |
sendhil76
Anmeldungsdatum: 01.03.2009 Beiträge: 8 Wohnort: India
|
 Verfasst am: Di Jun 30, 2009 3:31 pm Titel: |
|
 Verfasst am: Di Jun 30, 2009 3:31 pm Titel: |
|
|
sendhil76 wrote:
Thanks very much no-X!!
I will try out the procedure suggested by you and post here the results. |
|
| Nach oben |
|
 |
sendhil76
Anmeldungsdatum: 01.03.2009 Beiträge: 8 Wohnort: India
|
 Verfasst am: Mi Jul 01, 2009 5:35 am Titel: |
|
 Verfasst am: Mi Jul 01, 2009 5:35 am Titel: |
|
|
sendhil76 wrote:
Hello no-X,
I tried the steps outlined by you. I still get a blurry image when i fix this lens on my SD14.
An interesting thing i noted while doing all this is that, i am able to see a clear image when looking through the len directly...kind of like a fish eye lens view...and if i look through the other two lenses which are working ok with my SD14...the image is blurred.
So i guess there is some optical error...and in my quest for figuring out how to take apart this lens i came across this very useful link:
http://www.bigeye.url.tw/big5/photodiy.htm
Huge selection of pages to take apart just about any lens
Thanks once again for your assistance! |
|
| Nach oben |
|
 |
Xpres
 Anmeldungsdatum: 11.12.2007 Beiträge: 964 Wohnort: UK
Expire: 2014-10-28
|
 Verfasst am: Mi Jul 01, 2009 8:56 am Titel: |
|
 Verfasst am: Mi Jul 01, 2009 8:56 am Titel: |
|
|
Xpres wrote:
Good links - thanks!  _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|