MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Anyone using/used EOS300D with AA battery
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hi: i surfed all the digital forum but was unable to locate any information on the subject. My 300D recently died but was restored by a technician. Sometime in this part of planet BP511 is short in supply so approaching this learned community for experience of using this machine in jungle/rural areas without BP511/charger. AA are easily available in abundance in remote part of locations. Even canon did injustice with the users not making clip/tray for AA in BG-E1. As champions of alteration/modification are on this site therefore appreciate comments/experiences or alteration in BG-E1 for making AA insert/clip in place of two BP511 pockets removing.


Reply

Duracell still produces and sells the replacement for the Canon BP-511 battery. I think inexpensive copies (Duracell is not really inexpensive) are available on Ebay.


Reply

Are the AA batteries which you are talking about the normal alkaline devices ? If so, each gives a voltage of 1.5 volts, so that two in series will give you 3.0 V.

The BP511 looks like it is made up of 2 Lithium-ion batteries in series giving 2 x 3.7 = 7.4 V.

So two AA batteries in series wouldn't be enough even if you could fit them into the battery compartment. 4 of them, giving 6 V might work - I don't know - but I guess it would be extremely difficult to fit them into the camera.

EDIT. How about the following.

Does the camera have an input socket for an external power supply ? If so you can construct a small box to contain FIVE AA alkaline cells wired in series. This will give you 7.5 V. If it's too high you can lose 0.6 V using a silicon diode. This 7.5 V battery can be used to power the camera via a cable to the external power supply input. You could attach the box to the bottom of the camera using the tripod attachment point.


Reply

I was looking for the same information a couple of years ago and all I found was the camerahack site, which I notice you've also found Smile
I had the same idea (my 10D has a grip for which Canon never made AA holders, neither did anyone else) for adapting an old battery as a dummy connector and feeding it from an external holder, but I never tried it out.
Let us know if you solve this.


Reply

You could also use rechargeable NiMH batteries in an external pack.

They are 1.2V each, so 6 of these will give you 7.2V, which is close enough to 7.4V


Reply

eeyore_nl hat folgendes geschrieben::
Duracell still produces and sells the replacement for the Canon BP-511 battery. I think inexpensive copies (Duracell is not really inexpensive) are available on Ebay.

Hi eeyore: Surfed 23 threads of ebay and located Duracell DR 9607 7.4 V 720mAh Li-on Rechargable battery with similar problem of charger etc.

Zitat:
Does the camera have an input socket for an external power supply ? If so you can construct a small box to contain FIVE AA alkaline cells wired in series. This will give you 7.5 V. If it's too high you can lose 0.6 V using a silicon diode. This 7.5 V battery can be used to power the camera via a cable to the external power supply input. You could attach the box to the bottom of the camera using the tripod attachment point
.

Hi sichko: It does not have input socket supply. I made a dummy insert in the supply and placed first six Nicad in Pentax MD ME but the LCD showed small sign of charge and switched off the gear after a pause. I inserted NIMH and switched on the camera and it start flickering the batter sign and immediately shut down. One of my friend has already damaged the board following the instruction of Camera Hacker.com.

Zitat:
Zitat:
I was looking for the same information a couple of years ago and all I found was the camerahack site, which I notice you've also found
I had the same idea (my 10D has a grip for which Canon never made AA holders, neither did anyone else) for adapting an old battery as a dummy connector and feeding it from
an external holder, but I never tried it out. Let us know if you solve this
.

Hi Farside: You was lucky and saved ur gear from damage. I presume BP511 has built in control for current flow and external battery pack do not have so it will damage the machine. Similarly the BG-e1 have like Rebl film BG. I approach this forum to modify the BG-e1 for placing the battery holder for use AA. Other choice is to replace the machine which required funds but remote chances in the near future.
Thanks all of you for quick response.


Reply

gill hat folgendes geschrieben::

Hi eeyore: Surfed 23 threads of ebay and located Duracell DR 9607 7.4 V 720mAh Li-on Rechargable battery with similar problem of charger etc.

I just looked at Ebay, and there is an abundance of Canon-compatible BP511/BP512 chargers. Do you want to have Canon-original? Because those are getting scarce indeed, I guess.

Btw, the Duracell batteries that I have are the DRC511.


Reply

eeyore wrote:
Zitat:
I just looked at Ebay, and there is an abundance of Canon-compatible BP511/BP512 chargers. Do you want to have Canon-original? Because those are getting scarce indeed, I guess.


i am looking for using eos 300D with AA cells easily available in remote areas for power supply instead of BP511 which required charger and electric supply point which is difficult in remote locations like jungles. I want to know modus operandi to use AA through holder/clip placing in BG e1 which will not damage my gear and control current flow like BP511 an alternate supply to machine.


Reply

[quote="gill"]eeyore wrote:
Zitat:
I want to know modus operandi to use AA through holder/clip placing in BG e1 which will not damage my gear and control current flow like BP511 an alternate supply to machine.


Ah yes, I see your point. AA could be useful in remote locations without power supplies indeed! I misunderstood your question Smile


Reply

Might it be simpler to purchase one of the widely-available 'generic' grips for the camera, which accepts AA batteries? These units typically are sold with two different battery trays: one for the Canon-specific batteries, and one for using standard AA 1.5v batteries.
These things are all over ebay and I've even seen them over at Dealextreme.


Reply

Generic ones for the 300D that take AAs seem to have vanished off the market.


Reply

You can buy 2 x replacement Lithium batteries for £11.00 on ebay, isn't it cheaper just to buy a load of those?!


Reply

Thanks for all of my colleagues for valuable information. I replaced 300D with 400D and looking for BG-e3. It had also mutilated reports with NI Mh AA battery. I surfed a lot but could get correct information in this regard. Which AA cell alkline/Ni Mh give perfect power supply and correct display of charge in the LCD of 400D? Appreciate comments.