MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

What's wrong with this picture?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Hello folks.
I am trying 35mm film after quite a while of being digital only.
Having bought a few cameras recently (Olympus Trip 35, Fed 2 and a Yashica Electro 35) I loaded a cheap film into the first to try out. To see the results, I took it to a local store and had the film (Colour Truprint ASA200 - a film I found in a drawer!) developed as negatives and scanned.

Having looked at the results on my PC I'm quite disappointed: there are quite a few focussing errors on my part, most of the scans lak detail - especially when viewed at 100%.

My questions:

am I expecting too much from a cheap film?
should I try a different processing store?
can the scanning make a real difference?

Best regards,
RoyM


Reply

Hello ,

All of your question can make real difference.

Cheap film

Same film, same scan, same developing lab

Crappy result (lighting was poor)
http://www.mflenses.com/gallery/v/filmcamera/exa2a/

Superb result (lighting was excellent and camera also Wink
http://www.mflenses.com/gallery/v/filmcamera/yashica_electro_35/

Pro film, pro gear , same scan , pro result
http://www.mflenses.com/gallery/v/filmcamera/Voigtlander/bessa_L_voigtlander_heliar_Tenerife/


Reply

Some cheap film can be good, same don't. Slide and pro films are always better than any digital camera especially on medium or above format.


Reply

Ok - here is an example. Any comments welcome!

Best regards,
RoyM



Reply

wakarimasen hat folgendes geschrieben::
Hello folks.
I am trying 35mm film after quite a while of being digital only.
Having bought a few cameras recently (Olympus Trip 35, Fed 2 and a Yashica Electro 35) I loaded a cheap film into the first to try out. To see the results, I took it to a local store and had the film (Colour Truprint ASA200 - a film I found in a drawer!) developed as negatives and scanned.

Having looked at the results on my PC I'm quite disappointed: there are quite a few focussing errors on my part, most of the scans lak detail - especially when viewed at 100%.

My questions:

am I expecting too much from a cheap film?
should I try a different processing store?
can the scanning make a real difference?

Best regards,
RoyM


Exposure here my friend. You basically shot a silhouette, was this the outcome you where looking for?

This is known as a high contrast scene. The sky is big and bright while the foliage and trees are in shadow. you dont have any detail in the foreground.

Take a reading of the darkest shadows that you want to record detail in then close down 1 stop from this reading. So if your shadows called for f/2.8 at 1/60 shoot at f/4 1/60. This will provide for proper exposure of the shadows and also provide good exposure for everything else except the brightest highlights.

Remember that color negative film can handle at best 3 or 4 stops overexposure but at MOST only one stop underexposure. So it should be clear that in a high contrast scene you want to expose for the shadows.
Unless your shooting silhouettes.

If i would have shot this scene I would have walked right up to the furthest tree and took a reading directly from the bark, then i would have stepped back framed my pic and stopped down 1 stop focused and shot. i would also have bracketed a few shots then compared the results.

Results when weight is given to highlights. You get a silhouette.



Midtone adjustment, sharp and saturation. could be better but a quick look at the blocked out shadows here.