| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Sa Dez 27, 2008 9:05 am Titel: Cleaning Zeiss Planar 50mm |
|
 Verfasst am: Sa Dez 27, 2008 9:05 am Titel: Cleaning Zeiss Planar 50mm |
|
|
pbking wrote:
{edit}
Hey,
I bought a Zeiss Contax Planar 50mm 1.7 on eBay, the optics are perfect, but the aperture mechanism has become a little sticky - it won't stop any further down than f5.6.
I can see oil on the back of the blades (facing the rear element), and am curious now as to how to remove the rear element...does it screw off once I've removed the mount and aperture click-ring?
If anyone has CLAed this lens, I'd greatly appreciate your advice
Thanks!!
Zuletzt bearbeitet von pbking am Sa Jun 13, 2015 4:20 pm, insgesamt 4 Male bearbeitet |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Sa Dez 27, 2008 1:32 pm Titel: |
|
 Verfasst am: Sa Dez 27, 2008 1:32 pm Titel: |
|
|
Attila wrote:
Welcome!
This is first Planar what I heard with aperture problem  |
|
| Nach oben |
|
 |
peterqd
 Anmeldungsdatum: 28.02.2007 Beiträge: 7449 Wohnort: near High Wycombe, UK
Expire: 2014-01-04
|
 Verfasst am: Sa Dez 27, 2008 1:47 pm Titel: |
|
 Verfasst am: Sa Dez 27, 2008 1:47 pm Titel: |
|
|
peterqd wrote:
This thread by the_Suede might help a little. It doesn't go as far as cleaning the aperture blades but maybe he can help you if you PM him.
http://forum.mflenses.com/c-y-planar-50-disassembly-and-conversion-t12014.html _________________ Peter - Moderator |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Sa Dez 27, 2008 5:27 pm Titel: |
|
 Verfasst am: Sa Dez 27, 2008 5:27 pm Titel: |
|
|
pbking wrote:
Does everyone's aperture ring stop the lens down to F16 correctly, without the lens attached to the camera? I've mailed the seller, who has offered to CLA it. I'd rather him than me!!!!!  |
|
| Nach oben |
|
 |
the_Suede
 Anmeldungsdatum: 30.10.2008 Beiträge: 67 Wohnort: Sweden
|
 Verfasst am: So Dez 28, 2008 5:39 pm Titel: |
|
 Verfasst am: So Dez 28, 2008 5:39 pm Titel: |
|
|
the_Suede wrote:
Getting at the blades from the rear is a real hassle, you have to disassemble the entire aperture lever mechanism to remove the back lens group - not something you do quick and easy - but you can lift out the entire front lens group from the front after removing the locking ring and four setting screws, shouldn't take more than 10 minutes. I think you can lift the entire blade mechanism out from the front after removing the front lensgroup, but since I didn't go that far I'm not in a position to say for sure... Try the seller first, if something goes wrong you'll get a refund.
[edit] - Yes, the copies I've tried all stopped down correctly, with good and positive lever motion. Try holding the lever in active position and turning the aperture ring - you should be able to see or "feel" exactly where the blades hang. Does the F2-F2.8-F4 settings seem correct to you? The F2 setting should move the blades in by app. 2mm... _________________ You REALLY should have taken the blue pill... |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: So Dez 28, 2008 6:39 pm Titel: |
|
 Verfasst am: So Dez 28, 2008 6:39 pm Titel: |
|
|
pbking wrote:
Hold on... in the 'active position'? OK....If I apply gentle pressure to the direction (to the aperture lever) it is travelling in when stopping down...it goes to F16 nay bother...! Please tell me it's not meant to do that .
Is this really much to be worried about in all honesty?

Zuletzt bearbeitet von pbking am Sa Jun 13, 2015 4:21 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
the_Suede
 Anmeldungsdatum: 30.10.2008 Beiträge: 67 Wohnort: Sweden
|
 Verfasst am: Mo Dez 29, 2008 12:23 am Titel: |
|
 Verfasst am: Mo Dez 29, 2008 12:23 am Titel: |
|
|
the_Suede wrote:
Well, that's a sticky blade for sure... That lever is directly coupled to the aperture mechanism - it's meant to transmit the aperture position to the body. Normally a few tenths of a N would be applied to it - that would help matters somewhat, but the aperture mechanism should work freely without this help. Does aperture always stop at the same position when you work the other lever, the actuation lever? (the one with spring-tension on it)
I'd say a CLA is needed - the problem can only get worse if you let it be, and if the seller agreed to do it, then let him do it. Less risk for your own sake. _________________ You REALLY should have taken the blue pill... |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Mo Dez 29, 2008 1:26 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 1:26 pm Titel: |
|
|
pbking wrote:
OK (I know...I know) but I've entirely disassembled the lens (!).
I've also solved the problem!!! I bathed the aperture blades in lighter fluid...and boy, it shot open!!! Oh my, are we ever going to have a lot of photos when I get it back together!!
I've been documenting this , as there isn't any CLA online....so I'ma make one!! 
Zuletzt bearbeitet von pbking am Sa Jun 13, 2015 4:21 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
Attila
 Anmeldungsdatum: 24.02.2007 Beiträge: 58002
Expire: 2025-11-18
|
 Verfasst am: Mo Dez 29, 2008 1:34 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 1:34 pm Titel: |
|
|
Attila wrote:
Congrats! We all look forward your samples! |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Mo Dez 29, 2008 1:55 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 1:55 pm Titel: |
|
|
pbking wrote:
I've left the entire aperture mechanism in naptha/paraffin for a little while....I'm hungry now!!
Will blow the bejasus out of it with compressed air, to remove any remaining fluid before reassembly. Watch this space !!
{edit};
while(aperture!=sticky)
{
//all fully assembled now, working like a charm!! Will post pics of the CLA later this evening;
}
Liam |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Mo Dez 29, 2008 6:47 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 6:47 pm Titel: |
|
|
pbking wrote:
----
Zuletzt bearbeitet von pbking am Sa Jun 13, 2015 4:21 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
Carlsson
 Anmeldungsdatum: 26.07.2008 Beiträge: 793 Wohnort: Portugal
|
 Verfasst am: Mo Dez 29, 2008 7:59 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 7:59 pm Titel: |
|
|
Carlsson wrote:
Great one, thank you very much for this!  _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Mo Dez 29, 2008 8:14 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 8:14 pm Titel: |
|
|
pbking wrote:
most welcome! I did it for the Greater Good, and benefit of Lenskind |
|
| Nach oben |
|
 |
photo
Anmeldungsdatum: 16.12.2008 Beiträge: 9
|
 Verfasst am: Mo Dez 29, 2008 9:52 pm Titel: |
|
 Verfasst am: Mo Dez 29, 2008 9:52 pm Titel: |
|
|
photo wrote:
thanks! great tuto, will come handy if I need to CLA one of my contax |
|
| Nach oben |
|
 |
peterqd
 Anmeldungsdatum: 28.02.2007 Beiträge: 7449 Wohnort: near High Wycombe, UK
Expire: 2014-01-04
|
 Verfasst am: Di Dez 30, 2008 12:41 am Titel: |
|
 Verfasst am: Di Dez 30, 2008 12:41 am Titel: |
|
|
peterqd wrote:
Excellent work, thanks very much for this! For the benefit of Lenskind, could you give a link to the Zeiss exploded diagram? _________________ Peter - Moderator
Zuletzt bearbeitet von peterqd am Sa Jun 13, 2015 5:48 pm, insgesamt ein Mal bearbeitet |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: Di Dez 30, 2008 2:05 am Titel: |
|
 Verfasst am: Di Dez 30, 2008 2:05 am Titel: |
|
|
pbking wrote:
It's on my laptop (currently downstairs), so I'll pop it up in the morning
L |
|
| Nach oben |
|
 |
soikka
 Anmeldungsdatum: 11.06.2008 Beiträge: 534 Wohnort: Finland
|
 Verfasst am: Di Dez 30, 2008 9:09 am Titel: |
|
 Verfasst am: Di Dez 30, 2008 9:09 am Titel: |
|
|
soikka wrote:
Great info, thanks! _________________ DSLR: K-5,K20d+Grip, Ist*Ds
Film: MZ-5n, LX, MX+winder, SuperA+winder, ME Super,
M-series: 28/2.8, 35/2, 40/2.8, 135/3.5, 75-150/4, A-series: 50/1.7, Super-Taks: 55/1.8, 105/2.8, S-M-C Taks: 28/3.5, 50/1.4, 85/1.8, Sigma SW2 24/2.8, Tamron SPs: 90/2.5(I), 180/2.5, 500/8, Rikenon XR 35-70/3.5, Cosinon 40/2.5, F-1.7x AF-adapter, Olympus XA |
|
| Nach oben |
|
 |
pbking
Anmeldungsdatum: 27.12.2008 Beiträge: 43
|
 Verfasst am: So Jan 18, 2009 10:39 pm Titel: |
|
 Verfasst am: So Jan 18, 2009 10:39 pm Titel: |
|
|
pbking wrote:
Hi,
I have since PMed the guy who sent the diagram, but he hasn't replied yet.
I will contact Zeiss. Impending EOS 5D...so I clean cut the aperture tab off...ruined my best goddamn pair of snips, but hey!! no mirror issues (I hope!!) w00t463! |
|
| Nach oben |
|
 |
aoleg
 Anmeldungsdatum: 22.02.2008 Beiträge: 1387 Wohnort: Berlin, DE
|
 Verfasst am: Di Feb 03, 2009 3:57 am Titel: |
|
 Verfasst am: Di Feb 03, 2009 3:57 am Titel: |
|
|
aoleg wrote:
I'll try the sequence from the flickr set to clean/lubricate a Rollei HFT Planar 50/1.8 (in QBM mount, lenses are very dirty inside, and the focusing action is very dry). The lens looks very similar to the Zeiss Planar, the front ring unscrews just like it, and I can see three screws holding the front group. Didn't go any further yet - I'll post my results here if I succeed.
UPD: Nope, it's different past that point. It's simpler to access the blades from the rear of the lens by removing the mount and unscrewing the entire rear lens group. _________________ List of lenses |
|
| Nach oben |
|
 |
|
|
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|