MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Lens fungus permanent solution?
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

I have a few lenses with fungus in them that doesn't seem to affect the performance of the lens but I was trying to figure how to keep the fungus from spreading further into the organic glues and coatings.

I read about ammonia, kryptonite, chlorine, etc.. All seem really bad to me.

Well, has anyone tried to use a UV steralizing light? It kills everything in my aquarium water including mold spores. Why not for lenses? I think the UV coatings migh be a problem but maybe lighting them from the rear?

I'm thinking about building a UV "light box" big enough for my biggest lenses and putting all of them through a UV treatment. Hopefully kill spores that are present and those waiting to attack my new lenses.

Just a thought at the moment.


Reply

Put them on direct sunlight with aluminum folio reflectors after a few days fungus has not much chance to survive and after all store them always on dry place without caps (to allow light throw) a cheap UV filter would be nice as front cap you need to solve only the rare transparent cap.


Reply

Direct UV-light can harm fungus. The problem is that the lenses inside the cam will absorb most of the UV light.
And the spawn (spores?) will not be killed by UV light, they are really tough!!


Reply

guess the best way to stop it from spreading is keeping in a dry cabinet with control RH%. fungus need a certain humidity to stay alive. anything lower will die.


Reply

I don't think that it will die, I'm afraid. It just won't grow.
It is pretty difficult to "kill" fungus and even more so with fungus spawn.
These are really tough!


Reply

I use the lenses at maximun I can, and expose them to the sun all the friday's mornings (well, the woman who work at home do this if I 'm working).

Rino.


Reply

You can build an small UV source based on UV LEDs and cycle it on top of the lenses:

http://forum.mflenses.com/diy-ultimate-fungus-killer-t8886.html

Jes.


Reply

I have always kept my lenses in my camera bag with the caps on. Maybe I need to have a rethink.

However, I never take them outside if it's wet or very cold.


Reply

Okay, I now have my lenses stored in a transparent plastic container with the front caps off. I've purchased a couple of rechargeable silca gel packs and will put one inside.

Thanks for the heads up.


Reply

Just think about the essential conditions that fungus needs to germinate:
- moisture
- food
- darkness
- still air

Without even one of these conditions the spores cannot germinate. Without all of them there is absolutely no chance of fungus germinating or spreading. So keep your lenses in dry, well-lit and well ventilated place. If you take them outside in cold weather, think about condensation when you bring them inside again and make sure they dry out naturally. Relative humidity is a factor but it's related to temperature, so condensation will not form if you store your lenses at constant room temperature. Use a clear filter in preference to a lens cap and open the apertures up to let the light in. A well-ventilated place allows any humidity to escape, but in humid climates a clear plastic box with some silica-gel pouches (or even better, a de-humidifier) is better. Remember to change and dry out the pouches periodically. The worst thing you can do is keep them with their caps on in a camera bag in a cold room!


Reply

I live in an old cottage where dampness can be a problem. We have 2 dehumifiers running during the day.

If UV light kills fungus then why put UV filters on the lens? Doesn't this defeat the object?

Thanks


Reply

Light doesn't KILL fungus, it just stops it spreading. The same applies to ventilation and moisture, and also to the coating that provides the organic food matter. If you remove any of these vital ingredients the fungus will stop spreading and will often die back, but it can remain dormant for many years and will start spreading again whenever conditions are suitable once more.

I don't know if the UV portion of daylight has any special properties in this aspect, but I didn't mean a UV filter, just a plain protective one in preference to an opaque lens cap. I don't use filters at all.