MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

Step by step disassembly of the Ihagee original EXA - I
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

Well, thanks to Attila that sent me a Ihagee EXA body I've been able to know more in detail how these nice cameras do work. Although I haven't been able to fix it yet, I know where the problem is, and I've been able to reach that point in the shutter mechanism.

For anyone interested, here are my findings on how to unassemble the EXA:

#1, Remove the viewfinder and the take-up spool. Set the shutter speed in the "B" position.



#2, Remove the right side winding know by loosening the screw in its side





#3, Remove the two screws that hold the top plate



#4, Pull out the top right plate. If you're going to fix some mechanism inside, better place again the winding knob in its place..



#5, Go to the front side and take out the shutter blocker by removing the screw in the middle.



#6, Take out the four screws that support the lens base and take it out



#7, And take out also the three remaining screws that hold the front plate in place (bottom corners and top left corner).



#8, There are two additional screws on top of the front plate that have to be removed as well



#9, Now you can pull out the front plate.



#10, There is still a last screw to remove under the top plate. This one fixes the inside mechanics block to the case.



#11, Finally, remove the two screws inside the camera film holders.






#12, Now, before the internal mechanism can be pulled up it's necessary to remove the film sprocket taking out the two screws on bottom and the top screw that fixes a small gear










#13, So now the internal block should be free and removable from the camera top:



And that's all. It's not needed to disassemble the top left plate (I found it too late Smile ).

Some views, before cleaning and investigating the problem:







Special thanks to Carsten that helped a lot in translating some obscure german words that were making the text ununderstandable to me.

That's all by now.

Jes.


Zuletzt bearbeitet von Jesito am Do Aug 28, 2008 1:34 pm, insgesamt 2 Male bearbeitet


Reply

Wow, that's a great project Jes! Your pics make me want to put EXA on my search list Smile Look at the gunge in that camera! Shocked


Reply

Very nice guide !

Its almost the same for an Exakta, with some more complications.


Reply

Nice story. I haven't got one of these but your guide almost makes me want to get one and to have a look inside.