MFlenses - Ein neues Leben im digitalen Zeitalter
MFLenses 2026

Forum für Manual-Fokus-Objektive

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.

Entdecke die Welt der Vintage-Objektive mit Reparaturnotizen, echten Testfotos und detaillierten Archiv-Themen voller Bilder.
Spotlight

Hervorgehobene Partnerplatzierung auf der Forum-Startseite.

light seals Topcon Super D
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  


Reply

This caner ahas been sitting way too long,, so I'm planning to use it again. Just bought some batteries and now I need to change the light seals , I've read about adhesive foam would be ok, but never done it before.there are different thicknesses ,so which one is right for this camera ? I've seen specific photo sheets ,are they different than budget sheets that I could buy cheaper ? (One photo brand sheet would cost more than 20 no brand ones)


Reply

The Topcon Super-D Service Manual may specify light seal thickness.
https://uscamera.com/product/topcon-super-d-service-manual/

A similar camera may have a kit available. The advantage of a kit is parts are pre-cut from correct thickness(es).


Reply

I'd suggest just doing it with wool yarn. Just as effective and lasts forever.

Scrape out the old foam with a toothpick, apply a thin bead of E6000 or similar cement, and lay the yarn in and cut the ends to the correct length. Close the door to press it in, open it back up, let the cement cure, and you are done.

kiddo hat folgendes geschrieben::
This caner ahas been sitting way too long,, so I'm planning to use it again. Just bought some batteries and now I need to change the light seals , I've read about adhesive foam would be ok, but never done it before.there are different thicknesses ,so which one is right for this camera ? I've seen specific photo sheets ,are they different than budget sheets that I could buy cheaper ? (One photo brand sheet would cost more than 20 no brand ones)


Reply

BrianSVP hat folgendes geschrieben::
I'd suggest just doing it with wool yarn. Just as effective and lasts forever.

Scrape out the old foam with a toothpick, apply a thin bead of E6000 or similar cement, and lay the yarn in and cut the ends to the correct length. Close the door to press it in, open it back up, let the cement cure, and you are done.

kiddo hat folgendes geschrieben::
This caner ahas been sitting way too long,, so I'm planning to use it again. Just bought some batteries and now I need to change the light seals , I've read about adhesive foam would be ok, but never done it before.there are different thicknesses ,so which one is right for this camera ? I've seen specific photo sheets ,are they different than budget sheets that I could buy cheaper ? (One photo brand sheet would cost more than 20 no brand ones)


thank you, the right thickness should be the one that fits right same size as the place where need to be seated? in case that the mirror need some attention, could it work as well the wool yarn?


Reply

https://m.youtube.com/watch?v=0hmQWjuH4aY&pp=ygUkcmVwbGFjaW5nIGxpZ2h0IHNlYWxzIHRvcGNvbiBzdXBlciBE

An excellent video related to this camera


Reply

BrianSVP hat folgendes geschrieben::
I'd suggest just doing it with wool yarn. Just as effective and lasts forever.

Scrape out the old foam with a toothpick, apply a thin bead of E6000 or similar cement, and lay the yarn in and cut the ends to the correct length. Close the door to press it in, open it back up, let the cement cure, and you are done.

kiddo hat folgendes geschrieben::
This caner ahas been sitting way too long,, so I'm planning to use it again. Just bought some batteries and now I need to change the light seals , I've read about adhesive foam would be ok, but never done it before.there are different thicknesses ,so which one is right for this camera ? I've seen specific photo sheets ,are they different than budget sheets that I could buy cheaper ? (One photo brand sheet would cost more than 20 no brand ones)


I had a sheet of foam removed from a home printer scanner that was broken , so I've used that one for the mirror damper and wool yarn for the back cover top and bottom ,but I wonder if this camera needs some foam on the lateral of the back cover , not only top and bottom wool yarn. In fact, when I e got the camera it didn't had any of these ,but as far as I know some camera do have lateral foam , so I wonder if this one would need it or not?


Reply

I've managed to use same foam on the right side next to the hinge ,it seems to work, one the left side is less gap to fit same foam , so maybe a thinner material might work better , I'm not sure how this camera came from the factory


Reply

Happy Dog Now to test your work! (Put a small bright led torch inside; step into a dark room...)


Reply

visualopsins hat folgendes geschrieben::
Happy Dog Now to test your work! (Put a small bright led torch inside; step into a dark room...)


i did get some rings that would mount on front of the lens, allowing me to attach a small but powerfull flashlight(sealing it all around with tape), using Bulb mode , i couldn´t see any light leak , so i guess the result it isn´t to bad.


Reply

Like 1 I recently found the light seals kit I bought and used for my Spotmatics 10 years ago. There is enough left over for a few more cameras.

Seller may or may not still be selling the kits:

John Goodman
9153 Loma Vista
Dallas, TX 75243
USA

but Dallas has gone through several hurricanes and several floods since then YMMV...


Reply

John retired a while ago, he isn't selling seals anymore

visualopsins hat folgendes geschrieben::
Like 1 I recently found the light seals kit I bought and used for my Spotmatics 10 years ago. There is enough left over for a few more cameras.

Seller may or may not still be selling the kits:

John Goodman
9153 Loma Vista
Dallas, TX 75243
USA

but Dallas has gone through several hurricanes and several floods since then YMMV...